Sprayed. Bonded. Cured. Done in two weeks — without pulling a single door off its hinge.

"Those cabinets had twenty years of cooking grease and two layers of that honey-oak stain. I painted over them myself once — it peeled off in sheets by spring."
— Deborah Harmon, Naperville, IL
Full degreasing with TSP substitute — hardware and hinges removed, surfaces wiped twice.
Scuff-sand all profiles with 220-grit to break the existing finish and open the wood grain.
One coat shellac-based bonding primer, force-dried with heat gun. This is what stops the oak tannins from bleeding through.
Two full spray coats of catalyzed acrylic topcoat in Peppercorn SW 7674 — applied off-site on door panels, in-place on face frames.
Reinstall with brushed-nickel hardware. Final cure inspection at 72 hours.

Square Footage
180 sq ft
Color
Peppercorn
SW 7674
Turnaround
9 days

"The thermofoil was delaminating at every corner — you could peel it back with your fingernail. A contractor told me the whole kitchen had to come out. Recoat said no."
— Marcus Webb, Denver, CO
Heat-strip all thermofoil — every door and drawer front brought to bare MDF.
Two coats of oil-based primer on MDF edges to seal the porous substrate. Skip this and paint bubbles within a year.
Island and lower cabinets sprayed Naval SW 6244 — a deep navy that grounds the kitchen.
Upper cabinets sprayed Alabaster SW 7008 — the contrast draws the eye up and makes 9-foot ceilings read as 11.
Custom-mixed glaze applied to island for a furniture finish. Hardware swap to matte black.

Square Footage
280 sq ft
Color
Naval / Alabaster
SW 6244 / SW 7008
Turnaround
12 days

"My realtor said the bar was worth nothing — just demo it and stage with furniture. I almost did. The knotty pine was still solid, just dark and dated. Recoat made it the best feature in the house."
— Patricia Okafor, Columbus, OH
Full sand to bare wood — knotty pine has deep grain that traps old finish in the valleys.
First primer coat: oil-based knot-blocking primer. Dries 24 hours. Every knot gets a second spot-prime.
Second primer coat: catalyzed waterborne primer for adhesion and film build. Sanded again at 320-grit.
Two spray coats Pure White SW 7005 — the knots read as texture, not defect. The grain shows through the paint as depth.
Bar top refinished with two-part epoxy clear — heat and water resistant. Good for another 40 years.

Square Footage
120 sq ft
Color
Pure White
SW 7005
Turnaround
11 days
Most 20-door kitchens run around $3,800 and take 12 days. Tell us about yours.
All Sherwin-Williams. All spray-applied. All glass-smooth.
Carbon Matte
SW 7069
NeutralMindful Gray
SW 7016
NeutralPeppercorn
SW 7674
DarkNaval
SW 6244
DarkAlabaster
SW 7008
LightPure White
SW 7005
LightAgreeable Gray
SW 7029
NeutralBlack Fox
SW 7020
DarkSea Salt
SW 6204
CoolSage
SW 0017
CoolRequisite Gray
SW 7023
NeutralUrbane Bronze
SW 7048
DarkCustom colors available. Bring a chip or SW code — we'll match it exactly.