Yellowed honey-oak raised-panel kitchen cabinets with brass hinges under fluorescent light, grease shadow above stove
Before
Same kitchen angle with matte carbon gray sprayed cabinets, brushed-nickel pulls, clean countertop after professional cabinet paintingAfter
Drag to compare

Same Cabinets. New Kitchen.

Sprayed. Bonded. Cured. Done in two weeks — without pulling a single door off its hinge.

5-Year Finish Warranty
2-Week Turnaround
Kitchen Stays Usable
4.9 / 5 on Google (214 Reviews)
Licensed & Insured
Sprayed, Not RolledBonding Primer Baked to CureTwo-Week TurnaroundNo Doors RemovedCatalyzed Acrylic Top CoatFactory-Smooth FinishSprayed, Not RolledBonding Primer Baked to CureTwo-Week TurnaroundNo Doors RemovedCatalyzed Acrylic Top CoatFactory-Smooth Finish
Project 01Galley Kitchen · Oak Raised-Panel
Yellowed honey-oak raised-panel kitchen cabinets with visible grease buildup and brass hinges showing age

"Those cabinets had twenty years of cooking grease and two layers of that honey-oak stain. I painted over them myself once — it peeled off in sheets by spring."

Deborah Harmon, Naperville, IL

Scuff-sanded every profile. Shellac-based bonding primer. Two coats catalyzed acrylic — no brush marks, no roller stipple.

01

Full degreasing with TSP substitute — hardware and hinges removed, surfaces wiped twice.

02

Scuff-sand all profiles with 220-grit to break the existing finish and open the wood grain.

03

One coat shellac-based bonding primer, force-dried with heat gun. This is what stops the oak tannins from bleeding through.

04

Two full spray coats of catalyzed acrylic topcoat in Peppercorn SW 7674 — applied off-site on door panels, in-place on face frames.

05

Reinstall with brushed-nickel hardware. Final cure inspection at 72 hours.

Finished galley kitchen with matte carbon gray sprayed cabinets and brushed-nickel hardware, clean and modern

Square Footage

180 sq ft

Color

Peppercorn

SW 7674

Turnaround

9 days

$2,950
Project 02Two-Tone Island Layout · Thermofoil
Kitchen with peeling thermofoil cabinet doors showing delamination at corners and edges

"The thermofoil was delaminating at every corner — you could peel it back with your fingernail. A contractor told me the whole kitchen had to come out. Recoat said no."

Marcus Webb, Denver, CO

Thermofoil stripped, MDF scrim-coated, island in Naval — uppers in Alabaster. The contrast makes the footprint look twice as big.

01

Heat-strip all thermofoil — every door and drawer front brought to bare MDF.

02

Two coats of oil-based primer on MDF edges to seal the porous substrate. Skip this and paint bubbles within a year.

03

Island and lower cabinets sprayed Naval SW 6244 — a deep navy that grounds the kitchen.

04

Upper cabinets sprayed Alabaster SW 7008 — the contrast draws the eye up and makes 9-foot ceilings read as 11.

05

Custom-mixed glaze applied to island for a furniture finish. Hardware swap to matte black.

Two-tone kitchen with deep navy island cabinets and alabaster white upper cabinets after professional spray painting

Square Footage

280 sq ft

Color

Naval / Alabaster

SW 6244 / SW 7008

Turnaround

12 days

$4,600
Project 031970s Knotty-Pine Basement Bar
Dark dated knotty-pine basement bar cabinets from the 1970s with visible knots and orange wood tones

"My realtor said the bar was worth nothing — just demo it and stage with furniture. I almost did. The knotty pine was still solid, just dark and dated. Recoat made it the best feature in the house."

Patricia Okafor, Columbus, OH

Knotty pine is the hardest surface we coat — every knot bleeds. We use a two-primer system nobody else does.

01

Full sand to bare wood — knotty pine has deep grain that traps old finish in the valleys.

02

First primer coat: oil-based knot-blocking primer. Dries 24 hours. Every knot gets a second spot-prime.

03

Second primer coat: catalyzed waterborne primer for adhesion and film build. Sanded again at 320-grit.

04

Two spray coats Pure White SW 7005 — the knots read as texture, not defect. The grain shows through the paint as depth.

05

Bar top refinished with two-part epoxy clear — heat and water resistant. Good for another 40 years.

Transformed basement bar with white sprayed knotty-pine cabinets showing texture depth, modern and bright

Square Footage

120 sq ft

Color

Pure White

SW 7005

Turnaround

11 days

$3,200

Get Your Cabinet Quote

Most 20-door kitchens run around $3,800 and take 12 days. Tell us about yours.

Drop your kitchen photo here

or click to browse — JPG, PNG, HEIC up to 20MB

No commitment. We respond within one business day with a firm estimate.

Our Color Menu

All Sherwin-Williams. All spray-applied. All glass-smooth.

Carbon Matte

SW 7069

Neutral

Mindful Gray

SW 7016

Neutral

Peppercorn

SW 7674

Dark

Naval

SW 6244

Dark

Alabaster

SW 7008

Light

Pure White

SW 7005

Light

Agreeable Gray

SW 7029

Neutral

Black Fox

SW 7020

Dark

Sea Salt

SW 6204

Cool

Sage

SW 0017

Cool

Requisite Gray

SW 7023

Neutral

Urbane Bronze

SW 7048

Dark

Custom colors available. Bring a chip or SW code — we'll match it exactly.